![]() Slide the Jetflo fan onto the Hyper 212 EVO Heatsink. ![]() ![]() Use the M58 screws that come with the Jetflo fan to reattach the fan brackets. Remove the fan brackets by unscrewing the four fan screws. Remove the Rubber Anti-Vibration pads from the corners on the back side of the fan. It took less than 30 secs sustained load for it to throttle at stock settings. Remove the stock fan off of the Hyper 212 EVO. the cooler master hyper 212 evo has a compatibility bracket available (am4 socket mounting kit gen18) which will be free with purchase of. COOLER MASTER HYPER 212 INSTALLATION INSTALLwhile waiting for my NH-D15 to arrive I was running the Hyper 212 EVO from my old computer on my new 9900k. Cooler master hyper 212 evo am4 install guide due to the socket size and cooler mounting holes change on amd am4 motherboards, there will be a limited number of cpu compatible coolers at launch. You'll never get full performance out of a 9900k with your Hyper 212 EVO. You need to dissipate around 200W of heat if you're running at 4.6 Ghz and your cooler has a TDP of 150W. You'll be throttling in any stress test with a Hyper 212 EVO on a 9900k. Nice and quiet and good enough for me! The black looks nice had the RGB fan hooked to my ASUS mobo rolls slowly through the colors.A Noctua NH-D15 on a 9900k maxes out in the 70's degrees with no OC. With a i9-9900K and a 4.6GHz OC, I can run the fan at low speeds and have the temp max out at around 70C. It works fine as long as I don't go crazy overclocking the CPU. Johnpombrio said:I have the Hyper 212 EVO black edition which has a very similar mounting system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |